Xerox 4510 manual Printing Custom Size Paper

Printing on Specialty Media

Printing Custom Size Paper

1.Open the tray that you want to print custom paper from by pulling out on the handle.

4510-069

2.Insert the paper into the tray, and adjust the paper guides to fit the paper.

■The maximum width is 216 mm (8.5 in.).

■For single-sided printing, if you are using preprinted or prepunched paper, place the side to be printed facedown with the top of the paper entering the printer first.

■For 2-sided printing, if you are using preprinted or prepunched paper, place the first side to be printed faceup with the bottom of the page entering the printer first.

3.Insert the tray into the tray slot, and push the tray completely into the printer.

4510-044

4.On the control panel, select Change setup, and then press the OK button.

5.Select Custom Type, and then press the OK button.

6.Do one of the following:

■If your custom paper size is listed in the menu, select it, and then press the OK button.

■If your custom paper size is not listed in the menu, select New Custom Size, and then press the OK button.

Phaser® 4510 Laser Printer

3-43