Xerox 4510 manual Printing Envelopes from Tray, Envelopes can be printed from all trays

Printing on Specialty Media

Printing Envelopes

Envelopes can be printed from all trays.

Guidelines

■Use only paper envelopes specified in the Supported Paper Sizes and Weights table. Successful envelope printing is highly dependent on the quality and construction of the envelopes. Use envelopes made specifically for laser printers.

■It is recommended that you maintain constant temperatures and relative humidity.

■Store unused envelopes in their packaging to avoid the effects of moisture and dryness which can affect print quality and cause wrinkling. Excessive moisture can cause the envelopes to seal before or during printing.

■Avoid padded envelopes; purchase envelopes that lie flat on a surface.

■Remove air bubbles from the envelopes before loading by setting a heavy book on top of the envelopes.

■If wrinkling or embossing problems occur, use a different brand of envelopes made specifically for laser printers. This may help minimize these types of problems.

Caution: Never use envelopes with windows or metal clasps; they can damage the printer. Damage caused by using unsupported envelopes is not covered under the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas, please contact your local representative for details.

Printing Envelopes from Tray 1

1.Pull Tray 1 completely out of the printer.

4510-069

Phaser® 4510 Laser Printer

3-31