Xerox 4510 manual Printing Envelopes from Trays

Printing on Specialty Media

4.On the control panel, press the OK button if the size is correct and Envelope is displayed as the current paper type, or change the paper type and size:

a.Select Change setup, and then press the OK button.

b.Select Envelope, and then press the OK button.

c.Select the appropriate paper size, and then press the OK button.

5.In the printer driver, select either Envelope as the paper type or Tray 1 as the paper source.

Printing Envelopes from Trays 2–4

1.Pull the tray that you want to load with envelopes completely out of the printer.

4510-089

2.Insert the envelopes into the tray, and adjust the paper guides to fit the envelopes.

■For #10 Commercial, C5, and B5 envelopes, place the envelopes in the tray flap-side down with the top of the envelopes toward the left of the printer.

■Do not load more than 75 envelopes in Trays 2-4 at any time.

4510-108

Phaser® 4510 Laser Printer

3-33