Xerox 4510 manual Repeating Defects, Defect Spacing Supply to Replace

Solving Print-Quality Problems

Repeating Defects

Marks or voids are regularly repeated on the page. Use the following table to determine the supply that needs replacing.

Defect Spacing	Supply to Replace
38 mm (1.5 in.)	print cartridge
52 mm (2.0 in.)	print cartridge
94.4 mm (3.72 in.)	print cartridge
51 mm (2.0 in.)	transfer roller
94.2 mm (3.7 in.)	fuser

Different supplies may create print defects with similar measurements. To identify the faulty supply:

1.Replace the print cartridge (do not discard the packaging).

2.If the problem continues:

a.Remove and repackage the new print cartridge.

b.Reinstall the original print cartridge.

c.Replace the maintenance kit (fuser and transfer roller).

3.If the problem continues, contact your Customer Support Center.

To order Xerox supplies, contact your local reseller or go to www.xerox.com/office/ 4510supplies.

Phaser® 4510 Laser Printer

4-15