Xerox 4510 manual Printing Custom Size Paper

Printing on Specialty Media

5.On the control panel, press the OK button if Index Card is displayed as the current setup, or select the paper type:

a.Select Change setup, and then press the OK button.

b.Select Index Card, and then press the OK button.

6.In the printer driver, select the appropriate tray or paper type.

Printing Custom Size Paper

In addition to the wide variety of standard paper sizes that you can use for printing, you can also print on custom size paper from any tray. The custom size paper must be within the following dimensions.

		Input		Output
				500-Sheet
	Tray 1	Trays 2-4	Standard Tray	Stacker
1-Sided Printing
Short	76 – 216 mm	98 – 216 mm	76 – 216 mm	89 – 216 mm
Edge	3.0 – 8.5 in.	3.9 – 8.5 in.	3.0 – 8.5 in.	3.5 – 8.5 in.
Long	127 – 356 mm	148 – 356 mm	127 – 356 mm	140 – 356 mm
Edge	5.0 – 14.0 in.	5.8 – 14.0 in.	5.0 – 14.0 in.	5.5 – 14.0 in.
2-Sided Printing
Short	89 – 216 mm	98 – 216 mm	Same as Input	Same as Input
Edge	3.5 – 8.5 in.	3.9 – 8.5 in.
Long	140 – 356 mm	148 – 356 mm	Same as Input	Same as Input
Edge	5.5 – 14.0 in.	5.8 – 14.0 in.

Phaser® 4510 Laser Printer

3-42