Xerox 4510 manual Unfused or Partially Fused Image, Then select Fuser Configuration

Models: 4510

1 137
Download 137 pages 50.43 Kb
Page 85
Image 85

Solving Print-Quality Problems

Unfused or Partially Fused Image

The printed image is not fully fused to the paper and easily rubs off.

Possible Causes

Solutions

 

 

The paper may be damp.

Replace the paper.

 

 

Heavy or unusual paper may be in the tray.

Replace the paper with an approved paper type

 

then do the following:

 

At the printer’s control panel, select Printer

 

Setup, then Paper Handling Setup, and

 

then select Fuser Configuration.

 

Adjust the fuser setting for the paper type

 

selected.

The printer may be located in an environment with extreme temperature or humidity.

Verify that the printer is located in an environment with the temperature between 5° and 35° C (41° and 95° F) and the relative humidity between 15% and 85%. Move the printer to a suitable area, away from air conditioning vents, open loading docks, etc.

The fuser may be defective.

Replace the fuser (in the maintenance kit).

 

 

Phaser® 4510 Laser Printer

4-12

Page 85
Image 85
Xerox 4510 manual Unfused or Partially Fused Image, Then select Fuser Configuration