Xerox 4510 manual Tray 1 Mode and Tray 2-N Mode

Loading Paper

Tray 1 Mode and Tray 2-N Mode

The Tray 1 and Tray 2-N modes define the printer’s media handling behavior to better fit the kind of printing you want to do. Two modes determine how paper size and type are set for Tray 1 and for Trays 2-N, and which tray is used if you do not select a specific tray:

■Dynamic (Factory default for Tray 1 Mode): The dynamic setting prompts the printer to search the trays to find the paper size and type to match your print job. If no size and type matches are found and the media size and type have not been configured at the printer’s control panel, the printer will print from the highest priority unconfigured tray and set the paper type and size from the print job. The default tray priority is Tray 2, 3, 4, and then 1.

■Static (Factory default for Tray 2-N Mode): The static setting enables the user to select the paper size and type settings for the trays using the Paper Tray Setup menu option on the printer’s control panel. To print from a tray, the paper size and type of your print job must match the tray’s paper size and type settings on the control panel.

See also:

Advanced Features Guide at www.xerox.com/office/4510support for additional information on Tray 1 Mode and Tray 2-N Mode

Phaser® 4510 Laser Printer

3-17