Novell NetWare 4.X and 5.X NDS
6.Set the Print Server Name and Password.
a)Press the Print Server button.
b)Press the Print Server Name button and use the Touch Screen keyboard to enter the name you assigned to your print server (it is recommended you use all UPPER CASE characters). A default name will appear. Use the backspace key (it looks like an arrow pointing to the left) to clear out the default name prior to entering your new name. To include numbers or other characters in the name press the More Characters or 123 button. When finished press Save to retain the changes and return to the Print Server screen.
c)Press the Print Server Password button and use the touch screen keyboard to enter the print server password in the correct case you recorded when you set up your print server then press Save.
d)Press Save to exit the Print Server screen and save your changes.
7.OPTIONAL STEP: Change the desired SAP rate or Poll Interval for your printer or set the Primary File Server.
a)Press the Rates button and press SAP Enable.
b)Press the box under SAP Rate or Poll Interval and enter the desired number from the keypad. The default values are recommended. When finished, press Save to retain your changes and return to the NetWare Options screen
c)Press the Primary File Server button. At this screen press the Name Context button and use the touch panel keyboard to enter the context in which this printer resides. To access numeric characters and punctuation, press the More Characters or 123 button. When finished press Save.
d)Press the Exit Tools button. Allow approximately 2 minutes for the software to reset with the new settings.
8.Prepare for print driver installation
a)From the documentation package supplied with your printer, retrieve the CentreWare Network Services Pack. Proceed to the next section of this procedure called Go to a
Workstation and...
Go to a workstation and...
1.Use the CentreWare Print and Fax Drivers CD to install print drivers on a
Started with Network Services.
2.Connect the print driver you loaded above to the queue you created on the NetWare server.
3.Open an application and print a test job.
4.Check your test job for quality and use the problem solving section of the Reference Guide (pdf file) located on the Customer Documentation CD for resolving print defects.
5.If your test job does not print, refer to the troubleshooting section in the System Administration Guide (pdf file) located on the Customer Documentation CD to correct the problem.
6.Repeat this Go to a workstation and... procedure at each workstation that will print to this printer.
604P15000 | 18 |
