Xerox 604S14200 Go to the workstations and, e Select Print Configuration Report Now

Microsoft Windows (NetBEUI) Peer-to-Peer Networks

9.Prepare for print driver installation

a)Print a Configuration Report to use in the remainder of the installation.

b)Repeat Steps 2a and 2b

c)Select System Settings.

d)Select Configuration Report.

e)Select Print Configuration Report Now.

f)Press Cancel.

10.From the documentation package supplied with your printer, retrieve the CentreWare Network Services Pack. Proceed to the next section of this procedure called Go to a Workstation and...

Go to the workstations and...

1.Verify that the NetBEUI protocol is loaded (ALL Windows 3.11 or greater versions).

2.Use the CentreWare Print and Fax Drivers CD to install print drivers on a Windows-based workstation. Details for these procedures are contained in the leaflet entitled Getting Started with Network Service.

3.On the Configuration Report review the NetBIOS: area and note the Workgroup, Host Name, and Printer Name.

Windows 95, Windows 98 and Windows NT 4.X Workstation Users

•Click the Start button and select Settings.

•From the cascade menu select Printers.

•Select a printer with the right mouse button.

•Select the Properties entry in the cascade menu.

•Select the Details tab on the Properties dialog.

•Click the Add Port button and browse to the Workgroup.

•Double-click the name of the WorkGroup for the printer as shown on the Configuration Report.

•Double-click the Host Name of the printer as shown on the Configuration Report.

•Click once on the Printer Name then click OK.

4.Open an application and print a test page to verify operation.

5.If your print job does not print, refer to the Troubleshooting section of the System Administration Guide (pdf file) located on the Customer Documentation CD to solve the problem.

604P15400 26