Apple Macintosh (AppleTalk)
Before You Start
Verify the Ethernet connection is complete and the desired speed is set. Then return to this page.
The information on this card will enable you to print with the AppleTalk protocol from your Macintosh Computer.
Follow the steps as shown. The AppleTalk name for your Xerox printer is set at the factory as the network interface address of the printer. If you prefer not to set the AppleTalk Name manually, you may use the PUtility program found on the CentreWare Network Services CD. Refer to the document supplied with your printer entitled Getting Started with Network Services leaflet. for details on how to install PUtility.
Record the following information:
AppleTalk Name ________________________
AppleTalk Zone ________________________
Go to the printer and...
1.Connect your printer to the network with the appro- priate cabling.
2.Enter the Tools pathway
a)Press the Access (
or 
) button.
b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.
3.Enable the AppleTalk protocol
a)Press the Connectivity and Network Setup button.
b)Wait for the screen to refresh and press the Network Setup button.
c)Press the AppleTalk button.
d)Press the Protocol and Media button.
e)Press the Enable button.
f)Press Save.
4.Assign a Name and Zone to your printer.
a)You will be returned to the previous screen. Press the Name and Zone button.
b)At the next screen, press the Printer Name button and enter the name you want for the printer (this is the name that will appear in the Chooser on your workstations) using the touch panel keys. Press the Save button.
c)Press the Zone Name button, enter the desired text for this item using the touch panel keys, then press Save (the printer default is * which means the printer will appear in default zone). Press the Save button again to return to the AppleTalk Settings screen.
5.Exit the Tools Menu
a)Press the Exit Tools button.
Prepare for print driver installation
6.Print a Configuration Report. Repeat Steps 2a and 2b.
a)Select System Setting.
b)Select Configuration Report.
c)Select Print Configuration Report Now.
d)Press the Cancel button.
e)Press the Exit Tools button.
7.Review the AppleTalk Settings: area of the Configuration Report page and verify that AppleTalk is enabled, the AppleTalk Name is correct, and the AppleTalk Zone is correct (if used).
a)From the documentation package supplied with your printer, retrieve the CentreWare Network Services Pack Proceed to the next section of this procedure called Go to a
Workstation and...
29 | 604P15600 |
