Microsoft Windows (NetBEUI) Peer-to-Peer Networks
Before You Start
Verify the Ethernet connection is complete and the desired speed is set. Then return to this page.
.
Record the following information:
Network Interface Type ___________________
Workgroup Name _______________________
SMB Host Name ________________________
Printer Name ___________________________
OPTIONAL INFORMATION:
SMB Host Description ____________________
Printer Description _______________________
Go to the printer and...
1.Connect your printer to the network with the appro- priate cabling.
2.Enter the Tools pathway
a)Press the Access (
or 
) button.
b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.
3.Enable Microsoft Network printing.
a)Press the Connectivity and Network Setup button.
b)Wait for the screen to refresh and press the Network Setup button.
4.Enable the Protocol and Media.
a)At the next screen, press the Microsoft Net- works button.
b)At the next screen, press the Transport and Media button.
c)Press the Enable button. If Physical Media buttons appear, select NetBEUI/Ethernet. Then press Save.
5.Assign the Workgroup and Host Names
a)Press the Workgroup and Host button.
b)At the next screen, press the Workgroup Name button. Using the Touch Screen keys, enter the name of the workgroup in which you want the printer to appear then press Save.
c)You will be returned to the previous screen. Press the SMB Host Name button. Using the touch panel keys, enter the desired text for this item then press Save.
d)OPTIONAL STEP: Press the SMB Host Description button, enter the desired text then press Save. You will be returned to the previous screen.
e)Press Save to return to the previous screen.
6.Assign a Printer Name and Description
a)Press the Printer Description button.
b)Press the Printer Name button, using the touch panel keys, enter the desired text for this item then press Save twice to record the changes and exit to the previous screen.
c)OPTIONAL STEP: Press the Printer Description button, using the Touch Screen keys, enter the desired text for this item then press Save.
7.Set Maximum Connections and Timeout
a)Press the Connections button.
b)Touch the Maximum Connections soft button on the Touch Screen and using the keypad enter the desired maximum connection number between 10 and 30. It is recommended that this value should be set at the default.
c)Touch the Connection Timeout soft button on the Touch Screen. On the keypad enter the desired number of second between 1 and 32,767. Press Save to exit the Connections Screen.
8.Exit the Tools Menu
a)Press the Exit Tools button.
25 | 604P15400 |
