Scanning with the TWAIN Interface
NOTE: If you want to preview a stack of pages, use one of the pages as a test page and load it into the scanner. Click the Preview button and adjust the scanner settings. Then replace the page on the stack at its original position and load the stack into the scanner. Then just click the Scan button.
4.Adjust the Brightness, Contrast, and Resolution until the picture is what you want. You can also change the picture type again, for example, from color to grayscale.
5.When you are satisfied with the preview image, remember to place the document into the ADF again if you’re scanning a stack of pages. Click Scan.
6.When you’re finished scanning items, click Done to close the Basic Interface.
7.The scanned images will appear in the TWAIN application you’re using.
86 | DocuMate 632 Scanner User’s Guide |
