Xerox 6360 Paper Handling Settings, Printer Settings, Selecting Tray 1 MPT Mode on page, Dynamic

Printer Settings

Paper Handling Settings

This section includes:

■Selecting Tray 1 (MPT) Mode on page 4-9

■Selecting Tray 2–N Mode on page 4-10

■Setting the Duration for the Tray 1 (MPT) Prompt on page 4-12

■Setting the Duration for the Tray 2–N Prompt on page 4-13

■Changing the Load Paper Timeout on page 4-14

Selecting Tray 1 (MPT) Mode

The Tray 1 (MPT) Mode setting specifies:

■How Tray 1 (MPT) paper type and size are determined when you load paper in the tray but do not select the paper type and size on the control panel.

■When Tray 1 (MPT) is used for print jobs.

SettingDescription

Dynamic

(Factory default setting)

■Uses the settings from the next print job that prints from Tray 1 (MPT) to determine the paper size and type.

■Printer will print from Tray 1 (MPT) when it is specified in the printer driver or is automatically selected due to its paper matching a job's requested paper.

Static	■ The paper size and type already set for Tray 1 (MPT) stay in effect.
	■ Printer will print from Tray 1 (MPT) when it is specified in the printer
	driver or is automatically selected due to its paper matching a job's
	requested paper.
Automatic	■ Uses the settings from the next print job that prints from Tray 1 (MPT)
	to determine the paper size and type.
	■ Printer will print from Tray 1 (MPT) when paper is loaded, unless a
	different tray is specified in the printer driver.

To select the Tray 1 (MPT) mode setting, use one of the following options:

■The printer’s control panel

■CentreWare IS

Phaser® 6360 Color Laser Printer

4-9