Printer Settings

Setting the Duration for the Tray 1 (MPT) Prompt

The Tray 1 (MPT) prompt setting specifies the amount of time the prompt displays on the control panel after paper is loaded in the tray. The Tray 1 (MPT) prompt requests the user to confirm the current tray setup or to specify the correct paper type and size for the print job.

Duration

Behavior

 

 

None

Turns the tray setup prompt off.

 

 

30 Seconds

Displays the tray setup prompt for 30 seconds after paper is

(Factory default setting)

loaded in Tray 1 (MPT).

 

 

 

Infinite

Displays the tray setup prompt after paper is loaded in

 

Tray 1 (MPT) until a control panel selection is made. The printer

 

will not print until a selection is made.

 

 

To select a Tray 1 (MPT) prompt setting, use one of the following options:

The printer’s control panel

CentreWare IS

Using the Control Panel

To select the Tray 1 (MPT) prompt setting on the control panel:

1.Select Paper Tray Setup, and then press the OK button.

2.Select Tray 1 (MPT) Prompt, and then press the OK button.

3.Select the appropriate duration, and then press the OK button.

Using CentreWare IS

To select the Tray 1 (MPT) prompt setting using CentreWare IS:

1.Launch your web browser.

2.Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Click Properties.

4.Select the General folder on the left navigation panel, and then select Printer Defaults.

5.Select the appropriate setting in the Tray 1 (MPT) Prompt drop-down list.

6.Click the Save Changes button at the bottom of the page.

Phaser® 6360 Color Laser Printer

4-12

Page 62
Image 62
Xerox 6360 manual Setting the Duration for the Tray 1 MPT Prompt, Duration Behavior None, Seconds, Infinite