Xerox 6360 manual Selecting Tray 2-N Mode

Printer Settings

Using the Control Panel

To select a Tray 1 (MPT) mode setting on the control panel:

1.Select Paper Tray Setup, and then press the OK button.

2.Select Tray 1 (MPT) Mode, and then press the OK button.

3.Select the appropriate setting, and then press the OK button.

Using CentreWare IS

To select a Tray 1 (MPT) mode setting using CentreWare IS:

1.Launch your web browser.

2.Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Click Properties.

4.Select the General folder on the left navigation panel, and then select Printer Defaults.

5.Select the appropriate setting in the Tray 1 (MPT) Mode drop-down list.

6.Click the Save Changes button at the bottom of the page.

Selecting Tray 2–N Mode

The Tray 2–N Mode setting specifies how Tray 2–N paper type is determined when you load paper in the tray but do not select the paper type on the control panel.

Setting	Description
Static	The paper type already set for the inserted tray stays in effect.
(Factory default setting)
Dynamic	Uses the settings from the next print job that prints from the inserted tray
	to determine the paper type.

To select the Tray 2–N mode setting, use one of the following options:

■The printer’s control panel

■CentreWare IS

Phaser® 6360 Color Laser Printer

4-10