Xerox 6360 manual Click Properties

Printer Settings

Using the Control Panel

To select a Tray 2–N mode setting on the control panel:

1.Select Paper Tray Setup, and then press the OK button.

2.Select Tray 2-N Mode, and then press the OK button.

3.Select the appropriate setting, and then press the OK button.

Using CentreWare IS

To select a Tray 2–N mode setting using CentreWare IS:

1.Launch your web browser.

2.Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Click Properties.

4.Select the General folder on the left navigation panel, and then select Printer Defaults.

5.Select the appropriate setting in the Tray 2-Ndrop-down list.

6.Click the Save Changes button at the bottom of the page.

Phaser® 6360 Color Laser Printer

4-11