Xerox 6360 manual Setting the Duration for the Tray 2–NPrompt, Printer Settings

Printer Settings

Setting the Duration for the Tray 2–N Prompt

The Tray 2–N prompt setting specifies the amount of time the prompt displays on the control panel after paper is loaded in Trays 2–N. The Tray 2–N prompt requests the user to confirm the current tray setup or to specify the correct paper type for the print job.

Setting	Behavior
None	Turns the tray setup prompt off.
30 seconds	Displays the tray setup prompt for 30 seconds after paper is loaded in Trays 2–N.
(Default)
Infinite	Displays the tray setup prompt after paper is loaded in Trays 2–N until a selection is
	made on the control panel.

To select a duration setting for Tray 2–N prompts, use one of the following options:

■The printer’s control panel

■CentreWare IS

Using the Control Panel

To select the Tray 2–N prompt setting on the control panel:

1.Select Paper Tray Setup, and then press the OK button.

2.Select the Tray 2–N Prompt (the tray number depends on the number of trays in your printer), and then press the OK button.

3.Select the appropriate duration, and then press the OK button.

Using CentreWare IS

To select the Tray 2–N prompt setting using CentreWare IS:

1.Launch your web browser.

2.Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Click Properties.

4.Select General on the left navigation panel, and then select Printer Defaults.

5.Select the appropriate prompt setting in the Tray 2–N Prompt drop-down list.

6.Click the Save Changes button at the bottom of the page.

Phaser® 6360 Color Laser Printer

4-13