Operation safety
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements. They have been approved by safety agencies, and they comply with environmental standards. Please observe the following precautions to ensure your continued safety.
•
!
•
Always connect equipment to a properly grounded electrical outlet. If in doubt, have the outlet checked by a qualified electrician.
Warning: Improper connection of the equipment grounding conductor may result in risk of electrical shock. 
Never use a ground adapter plug to connect equipment to an electrical outlet that lacks a ground connection terminal.
•
•
•
•
•
•
•
Always place equipment on a solid support surface with adequate strength for its weight.
Always use materials and supplies specifically designed for your Xerox equipment. Use of unsuitable materials may result in poor performance and may create a hazardous situation.
Never move either the printer or the Printer Controller without first contacting Xerox for approval.
Never attempt any maintenance that is not specifically described in this documentation.
Never remove any covers or guards that are fastened with screws. There are no
Never override electrical or mechanical interlocks.
Never use supplies or cleaning materials for other than their intended purposes. Keep all materials out of the reach of children.
•Never operate the equipment if you notice unusual noises or odors. Disconnect the power cord from the electrical outlet and call service to correct the problem.
If you need any additional safety information concerning the equipment or materials Xerox supplies, call Xerox Product Safety at the following
For customers outside the United States, contact your local Xerox representative or operating company
iv | XEROX DOCUPRINT 92C IPS TROUBLESHOOTING GUIDE |
