CLEARING PAPER MISFEEDS AND JAMS
4. Press the green lever to unlatch the paper feeder assembly.
5.Remove and discard any partially fed paper. Make sure the paper supply is neatly stacked and the stack is not higher than the MAX line on the length guide. Make sure the length guide is firmly touching the back edge of the stack.
6.Latch the paper feeder assembly by pressing the green dot until the assembly clicks into place.
7.Slide the tray back into the printer until the tray latches and press the Continue button to resume printing.
8.Discard any pages sent to the sample tray or unused stacker tray when the paper jam was detected.
XEROX DOCUPRINT 92C IPS TROUBLESHOOTING GUIDE |
