CLEARING PAPER MISFEEDS AND JAMS
Frequent misfeeds
Frequent misfeeds may be caused by a glazed feed belt, especially if one tray feeds the same kind of paper better than another tray does. (Glazing is caused by a buildup of the chemicals found on most papers.)
If you suspect that the belt is glazed, try cleaning it with film remover obtained from your service representative.
Caution: Clean the feed belt only to correct misfeeds, not as routine maintenance. Because the belt is rubber, frequent cleaning dries it out and makes it fail prematurely. 
1.Clear any misfeeds that have occurred, but do not latch the paper feeder assembly. If necessary, unlatch it by pressing down on the bright green lever on the right side of the paper tray.
XEROX DOCUPRINT 92C IPS TROUBLESHOOTING GUIDE |
