Xerox 96 NPS manual Correcting skewed printing, Adjusting the registration transport roll levers

ADJUSTING PRINT QUALITY AND SPEED

Correcting skewed printing

If the printed output is repeatedly delivered with the image skewed (crooked on the page), or the pages themselves are damaged on arrival at the output bin, you may need to adjust the registration transport roll (heavy paper) levers. This may occur with heavy weight papers. Follow this procedure:

1.Open the right and left doors of the printer and locate the heavy paper levers, behind areas 2 and 4.

2.Pull the levers forward (toward you) on the silver latch release.

3.Turn both levers to the left (counter-clockwise), as illustrated in the following figur

Figure 7-1.Adjusting the registration transport roll levers

Note: If your system is equipped with the optional 7 by 10-inch paper enablement kit, it has three levers, as illustrated below. (This kit is not available for the Model 96 NPS.)

Turn the left-most lever to the left (counter-clockwise) and the other two levers to the right (clockwise).

7-2 XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE