Adjusting Print Quality and Speed

Figure 7-2.Three registration transport roll levers on system with 7 by 10-inch enablement kit

4.When the print job is complete, return the levers to their normal position.

5.Close the doors.

Note: Here are a few things to keep in mind when adjusting the registration transport roll lever:

•Position all levers for the same (either minimum or maximum) pressure setting. Do not intermix the positions of the levers.

•

Paper greater than 14 inches / 352 mm in any dimension is considered oversized.

Paper heaver than 24 pounds / 90 gsm is considered heavy weight.

The following factors may affect the positioning of the paper levers:

—Machine tolerance

—Paper supplier

—Job type (e.g., duplex).(clockwise).

7-3