Xerox 96 NPS manual Adjusting print quality and speed, Installing the custom transfer assist blade

7.Adjusting print quality and speed

This chapter considers means for checking and optimizing print quality and speed.

Installing the custom transfer assist blade

If you use nonstandard paper sizes, you should install the custom transfer assist blade to ensure good print quality.

Caution: The custom transfer assist blade comes as a kit with detailed instructions. Be sure to follow the instructions carefully.

To prevent damage to the printer, have your service representative show you how to customize and install a custom transfer assist blade for the first time.

You must use the standard transfer assist blade with standard paper of the following sizes:

•

•

In U.S. markets

—11.1—11.4 inches (282—290 mm)

—11.8—12.1 inches (300—307 mm)

—13—13.5 inches (330—343 mm) In non-U.S. markets

—11.1—11.4 inches (282—290 mm)

—11.8—12.1 inches (300—307 mm)

Note: With these paper sizes, transfer efficiency may be reduced.

XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE 7-1