8.Correcting stacking problems
This chapter describes stacker problems other than paper jams. It suggests corrective actions when printed sets are thrown around the stacker or the bin. (See “Clearing paper misfeeds and jams” for stacker paper jams.)
Symptom | Probable cause | Action |
|
|
|
Papers are thrown around the | Someone unloaded paper by | Unload the bin following the normal procedure. |
stacker. | opening the top cover of the | See “Unloading Stacker bin” in Guide to |
| stacker bin. | Performing Routine Maintenance.). |
|
|
|
Paper stack falls over or slides | Excessive paper curl | Try adjusting for paper curl (See “Paper curl |
around the bin |
| and paper jams” in Guide to Performing |
|
| Routine Maintenance |
|
|
|
Printing stops and the printer | Incorrect paper size or a | 1. Check the paper in the indicated tray. |
console displays a message | damaged sheet. | 2. If the paper is not the correct size, load |
indicating that an incorrect |
| |
| the correct size paper or select another | |
paper size is loaded in a |
| |
| feeder tray containing the correct paper | |
feeder tray. |
| |
| size. | |
|
| |
|
| If the paper size is correct, press the |
|
| Continue button to resume printing. |
|
|
|
XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE |
