3.Place the paper into the paper tray with the side to be printed facing toward you. Adjust the position of the paper so that its right edge is up against the right paper guide. Then move the left paper guide until it is resting gently against the left edge of the paper. The paper tray can be filled to the MAX line with standard weight paper (16 to 24 lbs. or about 60 to 90 g/m2).
If copying onto an envelope:
Insert the side to be copied on is facing upwards (as shown by the imprint on the paper tray) and the flap on the reverse side is closed and at the right when looking from the front of the printer. Leave a gap of approximately 1/32” (1 mm) between the paper guide and the left edge of the envelope.
When copying envelopes, labels and transparencies, it is recommended that you load and copy one envelope or sheet at a time.
4.Push the paper release lever back. The paper will be clamped by the paper feed roller inside the printer.
The handle may position itself. Do not force the handle or breakage could occur.
Paper jams may occur if:
−The paper tray is overstacked.
−If the space between the paper guide and the left edge of the paper is greater than 1 mm, or if the paper guide is pushing the paper so hard that the paper buckles.
−The paper is not stored properly and absorbs moisture from the air (replace the paper).
13
