Installation
Requirements
All electrical equipment is potentially dangerous if not installed and operated correctly. Make sure that you meet the following requirements when you set up or move the WorkCentre.
1.Use only the rated voltage from a
2.Keep the WorkCentre away from areas that are:
•Dusty or smoky
•Damp or humid
•Poorly ventilated
•In direct sunlight
•Subject to other extreme conditions
3.Place the WorkCentre on a stable, level surface.
4.Leave enough space around the ventilation outlets for heat from the fan to dissipate properly. Blocking these outlets could cause the WorkCentre to overheat, which can cause serious damage to the WorkCentre.
5.Leave some space at the front of the WorkCentre to make operation easier. Make sure that there is enough space at the front of the WorkCentre for the output paper to be stacked.
1
1 4 inches (100 mm)
2 4 inches (100 mm)
33 8 inches (200 mm)
2
9
