Xerox XE80, XE82, XE60, XE62 manual Drum Cartridge Life, Replacing the Drum Cartridge

Models: XE82 XE62 XE80 XE60

1 58
Download 58 pages 45.73 Kb
Page 52
Image 52

NOTE: Help the environment by recycling your used toner cartridge. Use the recycle sticker packed with the toner cartridge for instructions on returning the used toner cartridge to Xerox.

5.Refer to Installing the Toner Cartridge.

Drum Cartridge Life

The rated life for the drum cartridge is approximately 18,000 pages, but this can vary depending on how the drum cartridge is handled. If the surface of the drum cartridge is exposed to direct light, it will damage the surface of the drum and adversely affect the print quality. When the drum light comes on, there are 1,000 more pages able to be copied/printed until drum end of life. The order number for the drum cartridge is 13R553.

Replacing the Drum Cartridge

Ensure that you follow steps 1 through 14 (it is essential that you complete all 14 steps in order for the WorkCentre to operate). If you

have a J2 fault code and the drum indicator is blinking, the drum cartridge has reached end of life. The order number for the drum cartridge is 13R553.

Let the WorkCentre cool before performing the procedure.

Handle the drum cartridge very gently during installation to avoid any possible damage to the drum surface.

1.Open the front door by pulling it forward.

2.Place some scrap paper on a nearby level surface.

3.Gently pull out the toner cartridge. Do not pull it all the way out of the WorkCentre.

4.Hold the handle to support the

toner cartridge, and then pull it clear of the WorkCentre.

43

Page 52
Image 52
Xerox XE80, XE82, XE60, XE62 manual Drum Cartridge Life, Replacing the Drum Cartridge