Xerox XE60, XE62 manual Printer Driver Software Installation XE80, XE82, Ram

Printer Driver Software Installation (XE80, XE82)

The printer driver software is the program which runs the printer. It converts the data in the file you want to print into information that the printer can understand. It also controls communication between the printer and computer as the data is printed.

You will need the following PC hardware and software in order to use the printer driver:

	WorkCentre XE Series
Computer type	IBM PC/AT or Compatible Computer
Operating system	Windows 3.1x, Windows 95, Windows 98,
	Windows NT 4.0
CPU	486DX 66 MHz or better
RAM	8 MB or more
IEEE-1284 parallel	To ensure reliability use the IEEE-1284
cable	compliant parallel cable that is supplied with
	the machine. Only cables labeled “IEEE-1284”
	can be used with your WorkCentre.

If your PC does not have a CD-ROM Drive:

If you have access to a computer with a CD-ROM drive and a floppy disk drive, the WorkCentre XE CD-ROM has a program to create a set of installation diskettes.

NOTE: Refer to Creating WorkCentre XE Floppy Disk Installation Diskettes section in this User Guide for instructions on making your own floppy diskettes.

There are two other options available to you. Refer to the order sheet that is packaged with the WorkCentre XE. This sheet explains how you can:

•download the necessary software from the WEB site at: http://www.teamxrx.com

•order floppy diskettes from Xerox.

29