Xerox XE82, XE80, XE60, XE62 manual

The following is for the XE80 and XE82 machines only.

Problem	Suggested Solution
The WorkCentre	Use the IEEE-1284 parallel port cable supplied
does not print.	with the machine.
	Check the IEEE-1284 parallel cable connection
	at the WorkCentre and the PC.
	Check the IEEE-1284 cable with a computer and
	printer that work. If printing is still not possible,
	replace the cable.
	Check that the On-line/Off-line indicator light is
	on. If the machine is currently copying, the
	machine will print when the current copy job is
	finished.
	Check the printer settings in the Windows
	Control Panel to make sure that the print job is
	being sent to the correct port. (For Example:
	LPT1.)
	Uninstall, then reinstall the WorkCentre printing
	software.
Half of the page is	Reduce the resolution setting from 600 dpi to 300
blank.	dpi. Install more RAM into the computer.
	Change the page orientation in the printer setup
	dialog.
Printing is too slow.	Try closing other applications before printing.
	Check that the computer meets the minimum
	specifications listed in this manual
	Reduce the resolution setting from 600 dpi to 300
	dpi.
	(Windows 3.1x only.) In the options menu of
	print manager, remove the check from
	background printing.
Incorrect fonts	Use the fonts dialog box in the Control Panel to
	enable True Type fonts.

28