Xerox XE82, XE80, XE60, XE62 manual Creating WorkCentre XE Floppy Disk Installation Diskettes

Creating WorkCentre XE Floppy Disk Installation Diskettes

If floppy diskettes are required to install the WorkCentre Printer Driver Software, the user can order floppy diskettes or create a set of diskettes from CD-ROM.

To create a set of WorkCentre XE Printer Driver floppy Diskettes, find a PC that has a floppy diskette drive with a CD-ROM drive and follow the procedure below. Four or five blank high density diskettes will be required.

Windows 3.1x:

1.Insert the WorkCentre CD-ROMinto the CD-ROM Drive.

2.Choose File from the menu bar in Program Manager, and then choose the Run… command.

3.Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter depending on your CD-ROM Drive) in the command line box. Click on the OK button to proceed.

4.Follow the on-screen instructions.

Windows 95, Windows 98 and Windows NT 4.0:

1.Insert the WorkCentre CD into the CD-ROM Drive.

2.Click on the Start button and then choose the Run menu option.

3.Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter depending on your CD-ROM Drive) in the command line box. Click on the OK button to proceed.

4.Follow the on-screen instructions.

To use the Floppy Disk Installation Disks created, follow the same procedure for your operating system but refer to the floppy disk drive (A: B:) rather than the CD-ROM drive (D:).

36