Copying While Printing
In order to perform a copy job while the machine is printing:
1.Set up the copy job while the machine is printing.
2.Press Start. The current page will finish printing, then the copy job will start.
3.When you complete the copy job, the factory preset is 1 minute before it reverts to print mode or touch the
On-line/Off-line Button
Alternates between the
The
When the light is on printing is in progress. When the light is off there is no communication to or from the PC. When the light is blinking data is being received from the PC.
Power Saving
For assistance in changing the preset values refer to Programmable Features.
Power Reductions automatically reduce power consumed by the WorkCentre when the WorkCentre has not been used for a set period of time. There are two modes of power reduction; Power Save, and Power
Shut-off.
Power Save – In this mode, the fuser is maintained at a lower heat level, thereby saving power. The Ready Indicator will flash and the other indicators will remain on. To copy from Power Save select the desired features and press Start. The copies will be made automatically.
Power
21