Cleaning the Drum Cartridge
If some of the print is missing, you may need to clean the surface of the drum. Because the drum surface is very sensitive, you must take extreme care when cleaning it. Otherwise, it may become damaged and will have a serious effect on the print quality.
•Replacement of drum cartridges, toner cartridges, and other supplies are customer maintenance responsibilities and are not covered by this warranty. See the Warranty. Refer to Consumables.
•Put the drum cartridge down on a clean, uncluttered and level surface. The drum can easily become damaged if it is not handled with care.
•Do not let the drum surface come into contact with fingerprints, water, alcohol or other solvents that will damage the drum surface.
•Do not touch the drum surface with the edges of the
Follow the procedure below to clean the drum surface.
1.Unplug the power cord.
2.Remove the toner cartridge. (Refer to Replacing the Toner Cartridge).
3.Remove the drum cartridge. (Refer to Replacing the Drum Cartridge).
4.Take a sheet of clean paper and roll it into a tube.
Roll it tightly so that the diameters of the holes at each end are less than the thickness of your little finger.
5. Holding the drum cartridge as shown, gently rub the surface of the drum with the
6.Replace the drum cartridge. (Refer to Replacing the Drum Cartridge).
7. Replace the toner cartridge. (Refer to Replacing the Toner Cartridge).
38
