Xerox XE60 Cleaning the WorkCentre, Cleaning the Outside, Cleaning the Document Glass and Cover

Cleaning and Maintenance

Cleaning the WorkCentre

Do not use ammonia-based sprays or volatile solvents such as thinner to clean the WorkCentre, as these can damage the WorkCentre surface.

Always unplug the power cord before cleaning any part of the WorkCentre.

Cleaning the Outside

Clean the outside surfaces of the WorkCentre by wiping them with a soft, clean, lint-free cloth.

•Keep the front door closed when cleaning the outside of the WorkCentre.

•You can dampen the cloth slightly with water, but be careful not to let any water drip onto the WorkCentre or inside it.

Cleaning the Document Glass and Cover

Keeping the document glass clean helps ensure the best possible copies. Xerox suggests that you clean the document glass at the start of each day and during the day as needed.

Do not pour or spray water directly onto any part of the WorkCentre.

1.Slightly dampen a soft lint-free cloth or paper towel with water.

2.Lift the document cover.

3.Wipe the surface of the document glass until it is clean and dry.

4.Wipe the underside of the white document cover until it is clean and dry.

5.Close the document cover.

37