101

Creating an audio CD

10
5Move the cursor to the dotted frame in the

song list, and turn the [DATA/JOG] dial to

select the song that will be written to track 1.

Note
Note
•When you turn the [DATA/JOG] dial, you will see only
songs for which the current stereo track contains data.
•Songs with a stereo track shorter than four seconds will
not be displayed.
•Songs with a stereo track longer than 324 minutes will
not be displayed.
6Repeat steps 4 and 5 to select the songs that

will be written to track 2 and following.

Tip!
Tip!
•When you move the cursor to the NEW button and
press the [ENTER] key, a new song will be added at the
end of the existing songs.
•By using the INS button instead of the NEW button, you
can insert a new song immediately before the song that
is selected in the list.
•You can use the DEL button to delete the currently
selected song from the song list.
Note
Note
When you add a song to the song list, the same song will
always be initially selected. Change this as desired.
7Move the cursor to the EXECUTE button and

press the [ENTER] key.

A popup window will ask you to confirm.

8To begin writing, move the cursor to the OK

button and press the [ENTER] key.

While data is being written to the media, a popup

window will indicate “CD Writing...” When writing

is completed, a popup window will ask you

whether you want to finalize.

Note
Note
• If an error message of “ATAPI Error!” appears while
writing, it is possible that a buffer underrun has
occurred. In this case, either decrease the writing speed
to 4x or set the UNDERRUN PROTECT button to the
ENABLE position. (
→
p. 99)
•If you enabled the writing test in “Basic settings for the
CD-RW drive” (
→
p. 99), a writing test will be per-
formed before the data is actually written. If a problem
occurs during the writing test, an error message will
appear.
•Copy-prohibit data will automatically be written into
the CD that is created.
9To finalize the disc, move the cursor to the

OK button and press the [ENTER] key.

If you do not want to finalize the disc, move the

cursor to the CANCEL button and press the [ENTER]

key.

This completes the writing process.