Yamaha AW 16G 1, 2, 3, 4, 5, 6, 7

Creating an audio CD

102

Writing audio data (Disc At Once)

Here’s how to use the Disc At Once method to write ste-

reo tracks from songs saved on the hard disk to CD-R/RW

media. Use this method if you do not want to create

silence between each track of the CD, or if you want to

write a single song divided into multiple tracks on the

CD.

1Make sure that the appropriate virtual track is

selected for the stereo track of the song(s)

you want to write.

2If you want to divide the song into CD tracks

at the marker locations speciﬁed within the

song, check that markers have been set at

the appropriate locations.

3Repeatedly press the [CD] key or hold down

the [CD] key and use the CURSOR [ ]/[ ]

keys to access the CD WRITE page of the CD

screen.

4Move the cursor to DISC AT ONCE and press

the [ENTER] key.

The following screen will appear.

1Song list

This is a list of the songs containing stereo tracks

that will be written to the CD-R/RW media. The line

enclosed by a dotted frame is currently selected for

operations. If no songs have been registered, this

will indicate “-NO TRACK-”.

BMARKER button

For each stereo track, this enables or disables the

markers that have been set within that song.

When you move the cursor to this button and press

the [ENTER] key, the start pint, end point and mark-

ers within the currently selected stereo track will be

enabled. (A “ﬂag” icon will appear at the left of the

list.) If markers are enabled for a stereo track, a track

number will be written to the CD at the location of

each marker. Regardless of any areas of silence, the

entire region from the Start point to the End point

will be written.

CINS button

Inserts a new song in front of the song currently

selected in the list.

DNEW button

Adds a song at the end of the song list.

EDEL button

Deletes the selected song from the list.

FEXECUTE button

Executes writing to the CD media.

Tip!

If data has already been written on the CD-RW media

that you insert, a popup window will appear immediately

after step 3, asking whether you want to erase the data.

Move the cursor to the OK button if you want to erase

the entire media, or to the CANCEL button if you want to

cancel execution. Then press the [ENTER] key.

5Move the cursor to the NEW button, and

press the [ENTER] key.

The song list will show information (track number/

song name/size of the stereo track) for the song that

will be written to track 1 of the CD.

6Move the cursor to the dotted frame in the

song list, and turn the [DATA/JOG] dial to

select the song that will be written to track 1.

Note

•When you turn the [DATA/JOG] dial, you will see only

songs for which the current stereo track contains data.

•Songs with a stereo track shorter than four seconds will

not be displayed.

•Songs with a stereo track longer than 324 minutes will

not be displayed.

7If you want the stereo track of the selected

song to be divided into CD tracks at the loca-

tion of each marker, move the cursor to the

MARKER button and press the [ENTER] key.

Markers will be enabled for that song, and a “ﬂag”

icon will appear at the right of the list.

Tip!

•Markers can be enabled/disabled independently for

each song.

•When you use markers to divide a stereo track, the

location of the divisions will be speciﬁed in units of 1/

75 second.

Note

•Note that if markers are enabled, the track numbers

shown in the list will not match the number of tracks

written to the CD.

•A maximum of 99 tracks can be written to an audio CD.

If, for example, markers are enabled for the song you

write to CD track 1, and this song contains 98 markers,

it will not be possible to write any more songs to that

CD-R/RW media.

6 542

3 1