Appendix
198
Display message list

■Messages

A/B POINTS NOT FOUND Repeat Playback cannot be performed because A/B points are not specified.
BULK: BYTE COUNT MISMATCH! The data length specified within the received system exclusive data did not
match the length of the data that was actually received.
BULK: CHECK SUM MISMATCH! The check sum of the received system exclusive is incorrect.
BULK: MEMORY PROTECTED! The scene memory you attempted to receive is protected.
CANNOT REDO Redo (re-execution of an operation) is not possible.
CANNOT SET MARK It is not possible to specify a mark at an already-specified position.
CANNOT UNDO Undo (cancellation of an operation) is not possible.
CD PLAY MODE NOW Since the AW16G is in CD Play mode, this operation is not possible.
CH. PARAMETER INITIALIZED The mixer parameters of the channel have been initialized.
DIFFERENT TC FRAME TYPE MTC of a different frame type than the internal setting is being received.
DIGITAL-ST-IN REC PROHIBIT. Recording is prohibited for the signal being input from DIGITAL STEREO IN.
DISK BUSY!! The reading speed of the internal hard disk is not fast enough, or the reading
speed has slowed down because the recorded data has become fragmented.
DISK FULL!! There is insufficient space on the internal hard disk.
IN/OUT POINTS NOT FOUND Auto-punch recording cannot be performed because in/out points are not speci-
fied.
IN/OUT POINTS TOO CLOSE The auto punch-in/out interval is too short. It cannot be set less than approxi-
mately 100 msec.
LOCATE POINT ERASED The locate point has been erased.
LOCATE POINT SET The locate point has been set.
MARK POINT ERASED The mark has been erased.
MARK POINT SET The mark has been set.
MEMORY FULL!! The song has no more free space. One song can use a maximum of 6.4 GB.
MIDI BULK RECEIVED A bulk data dump was received.
MIDI IN: DATA FRAMING ERROR! Invalid data may have been received at the MIDI IN connector.
MIDI IN: DATA OVERRUN! Invalid data may have been received at the MIDI IN connector.
MIDI: RX BUFFER FULL! Receiving more MIDI data than it can handle.
MIDI: TX BUFFER FULL! Attempting to transmit more MIDI data than it can handle.
MTC SLAVE MODE NOW This operation cannot be performed because the AW16G is in MTC Slave mode.
NO MARK LEFT The allowable number of marks has been exceeded.
NO MEDIA!! Media has not been inserted.
RECORDER BUSY The operation cannot be executed because the recorder is operating.
RECORDER RUNNING The operation cannot be executed because the recorder is recording or playing.
RECORD TRACK NOT SELECTED Recording cannot be performed because you have not selected a record track.
REDO COMPLETE Redo (re-execution of the previous operation) has been completed.
REPEAT POINTS TOO CLOSE The repeat interval is too short. It cannot be set to less than one second.
SOUND CLIP MODE NOW Since you are in Sound Clip mode, this operation cannot be executed.
STEREO TRACK PLAYBACK MODE Since you are in Stereo Track Playback mode, this operation cannot be executed.
SYSTEM ERROR!! An internal system error has occurred.
THIS SONG IS PROTECTED. This song is protected, and cannot be edited or recorded.
TOO MANY REGIONS! There are too many recorded regions.
TRIGGER LIST RECORDING A sampling pad trigger list is being recorded.
UNDO COMPLETE Undo (cancellation of the previous operation) has been executed.
WRONG WORD CLOCK!! An inappropriate word clock is being received from the connected device to
which you are synchronizing.