129
Track editing
12
MOVE

Moves the specified region of data to the specified loca-

tion of the specified track. This is similar to COPY, but

differs in that the move-source data will be deleted.

For an audio track
For a pad track (loop)
For a pad track (one shot)
Parameter list

The parameters are the same as for the COPY command.

However, you cannot select CLIP for 1 From TRACK.

Also, there is no L To Times setting.

*1. 2 From V.TR and 9 To V.TR can be selected only if
From TRACK=1–16, 1/2–15/16, or STEREO.
*2. 3 From PAD and J To PAD can be selected only if
TRACK=PAD.
*3. Measure lock function (6 Start Measure Lock, 7 End
Measure Lock)
“Measure lock” is a function that matches the beginning
of the measure or beat included in the copy-source
region with the desired location of the copy-destination.
To use the measure lock func-
tion, move the cursor to the
measure display field of From
Start or From End, specify the
measure/beat location that
will be the reference point for the matching, and press
the [ENTER] key. A “lock” icon will appear beside the
value that you specified, and the measure lock function
will be turned on for From Start or From End. (This can
be turned on for either Start or End, not both.)
While the measure lock function is on, the value of that
measure display format setting will be fixed, and cannot
be modified. In this state if you use the counter display
format field to specify the From Start and From End loca-
tions, and execute the copy, the location you specified in
the measure display format field will be aligned with the
copy-destination To Start setting.
When measure lock = on
*4. The possible choices for 8 To TRACK (copy-destination
track) will depend on your selection for 1 From TRACK
(copy-source track).
If 1 From TRACK is a single audio track 1–16, you will be
able to select only a single audio track 1–16.
If 1 From TRACK is CLIP, STEREO, 1/2–15/16 (a pair of
adjacent audio tracks), you will be able to select only STE-
REO or 1/2–15/16 (a pair of adjacent audio tracks).
If 1 From TRACK is PAD, you will be able to select only
PAD.
If 1 From TRACK is ALL (OVER) or ALL (INS), you cannot
select TO TRACK.
*5. Grid function (M GRID)
When this function is on, the To Start location cannot be
specified in counter-display format; it can be specified
only in measure/beat units.
By using the Grid function in conjunction with the Mea-
sure Lock function, you can easily copy measure/beat-
length segments of data whose divisions do not fall pre-
cisely on the measure or beat.
A 4 5 6 E F G H
COPY
Start
To Start
From
Track
To
Track
From
Track
To
Track
End
Measure
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A B C D E F G H
To Start
5
4

7M

61 23

8 9J K

MOVE
Start
To Start
From
Track
To
Track
From
Track
To
Track
End
1 2 3 4 5 6 7 8
A B C D E F G H
1 2 3 4 5 6 7 8
A B 4 5 6 F G H
MOVE
From Start
To Start
From
PAD
To
PAD
From
PAD
To
PAD
From End
MOVE
From Start
To Start
From
PAD
To
PAD
From
PAD
To
PAD
From End