103
Creating an audio CD
10
8Repeat steps 5–7 to select the songs that will
be written to track 2 and following.
Tip!
Tip!
•When you move the cursor to the NEW button and
press the [ENTER] key, a new song will be added at the
end of the existing songs.
•By using the INS button instead of the NEW button, you
can insert a new song immediately before the song that
is selected in the list.
•You can use the DEL button to delete the currently
selected song from the song list.
Note
Note
When you add a song to the song list, the same song will
always be initially selected. Change this as desired.
9Move the cursor to the EXECUTE button and
press the [ENTER] key.
A popup window will ask you to confirm.
10
To begin writing, move the cursor to the OK
button and press the [ENTER] key.
While data is being written to the media, a popup
window will indicate “CD Writing...” When writing
is completed, the CD-R/RW media will be ejected,
and the following popup window will appear.
Note
Note
•If you enabled the writing test in “Basic settings for the
CD-RW drive” (
→
p. 99), a writing test will be per-
formed before the data is actually written. If a problem
occurs during the writing test, an error message will
appear.
•Copy-prohibit data will automatically be written into
the CD that is created.
11
If you want to create another CD with the
identical contents, insert a new volume of
media, and move the cursor to the OK but-
ton and press the [ENTER] key.
Writing will begin again.
Alternatively, you can move the cursor to the CAN-
CEL button and press the [ENTER] key to exit the
writing process.