Yamaha AW 16G 5.13.1.2. MMC PLAY, 5.13.1.3. MMC DEFERED PLAY, 5.13.1.4. MMC FAST FORWARD, 5.13.1.5. MMC REWIND, 5.13.1.6. MMC RECORD STROBE, 5.13.1.7. MMC RECORD EXIT, 5.13.1.8. MMC RESET, 5.13.1.9. MMC LOCATE (TARGET)

207

Appendix

< Reception >

If the AW16G is operating as an MMC Slave, the transport will stop

when this message is received with a matching device number or a

device number of 7F.

5.13.1.2. MMC PLAY

< Reception >

If the AW16G is operating as an MMC Slave, the transport will begin

playback when this message is received with a matching device num-

ber or a device number of 7F.

5.13.1.3. MMC DEFERED PLAY

< Transmission >

This message is transmitted with a device number of 7F when the

PLAY key is pressed.

< Reception >

If the AW16G is operating as an MMC Slave, the transport will begin

playback when this message is received with a matching device num-

ber or a device number of 7F.

5.13.1.4. MMC FAST FORWARD

< Transmission >

This message is transmitted with a device number of 7F when the FF

key is pressed or when the Shuttle is rotated toward the right to enter

Cue mode.

< Reception >

If the AW16G is operating as an MMC Slave, the transport will begin

fast-forward when this message is received with a matching device

number or a device number of 7F.

5.13.1.5. MMC REWIND

< Transmission >

This message is transmitted with a device number of 7F when the

REWIND key is pressed or when the Shuttle is rotated toward the left

to enter Review mode.

< Reception >

If the AW16G is operating as an MMC Slave, the transport will begin

rewind when this message is received with a matching device number

or a device number of 7F.

5.13.1.6. MMC RECORD STROBE

< Reception >

This message is received if the AW16G is operating as an MMC Slave

and the device number matches or is 7F. If the transport is stopped,

then recording will begin. If the transport is playing, then punch-in

will occur.

5.13.1.7. MMC RECORD EXIT

< Reception >

This message is received if theAW16G is operating as an MMC Slave

and the device number matches or is 7F. If the transport is recording,

then punch-out will occur.

5.13.1.8. MMC RESET

< Transmission >

This message is transmitted with a device number of 7F when song

loading is ﬁnished.

< Reception >

This message is received if the AW16G is operating as an MMC Slave

and the device number matches or is 7F. MMC-related internal set-

tings will be reset to the power-on state.

5.13.1.9. MMC LOCATE (TARGET)

< Transmission >

This message is transmitted with a device number of 7F when a

locate-related key such as MARK SEARCH/IN/OUT is pressed, a FF/

REW/shuttle operation is performed, when the transport returns to

the auto-punch pre-roll point, or when repeating.

< Reception >

This message is received if the AW16Gis operating as an MMC Slave

and the device number matches. The transport will locate to the time

code position speciﬁed within the command data.