■General Setting

The default settings are marked with “ * ”.

System

Screen Saver

You can set the screen saver to on/off.

When set to on, this Player will switch to screen saver mode if there is no operation for 3 minutes. After that, this Player will turn to standby mode when there is no operation for 27 minutes.

On*, Off

Disc Auto Playback

You can set Disc Auto Playback to on/off. When set to on, a disc will play back automatically after loading.

On*, Off

HDMI Control

You can set the Player to receive control signal from a TV/AV receiver compatible with the HDMI Control function via an HDMI cable (p. 10).

On, Off*

Using HDMI Control function

Using the HDMI Control function, you can interactively operate this Player with your TV (HDMI Control function supported).

When you connect this Player to the TV compatible with the HDMI Control function using an HDMI cable and set HDMI Control in the SETUP menu to on (p. 25), you can perform the function listed below.

•Automatic input select function

When you start playback of this Player, the input selector of the TV (and an AV receiver if this Player is connected to the TV via the AV receiver) is switched to this Player automatically. TV Power is turned on automatically depending on the TV.

•Automatic power off function

When you turn off the TV while this Player is in stop mode and the SETUP menu screen is not displayed, the power of this Player is also turned off automatically.

Notes

–HDMI Control function may not work properly depending on the TV.

–Functions other than ones shown above may work depending on the TV or AV receiver.

–In order to make the HDMI Control function available, set up settings for the HDMI Control function on ALL components (this Player, TV, and AV receiver). Certain operation may also be required.

–Each function may be set independently to activate/deactivate depending on the TV.

–Refer to the operation manuals supplied with the TV and/or AV receiver for details regarding setup.

–When set to on, power consumption during standby mode increases due to HDMI Control function.

SETUP menu

 

Load Default

 

You can reset all settings of this Player to default setting

 

except Security setting (p. 26). For details on default

 

settings, see pages 22–28.

 

Upgrade

 

You can upgrade the software manually from USB

 

Storage or Network. For details on software upgrade, refer

 

to “Software upgrade” (p. 31).

 

Easy Setup

 

You can perform Easy Setup (p. 12).

 

Local Storage

4

You can display Local Storage information, format Local

Storage, and select Front USB/Rear USB to save the BD-

Settings

memory device, select Information and press ENTER

Live data.

 

To format (empty) the “BUDA” folder in the USB

 

when “Format” is focused on the screen.

 

Front USB, Rear USB*

 

Hint

–Local Storage is used as an auxiliary memory when Blu-ray Disc is played back.

3D Playback Message

You can turn on or off a warning message concerning 3D video playback that appears on the TV when this Player is turned on.

On*, Off

Language

 

 

English

 

 

 

OSD

 

 

 

You can select the language for On Screen Display which

 

 

is the messages or menu displayed on the screen such as

 

SETUP menu.

 

 

 

English, Français , Español , Deutsch , Italiano , Svenska ,

 

Nederlandse ,

,

 

 

Menu

You can prioritize the language for disc menu.

English, Français , , Español , Deutsch , Italiano ,

Nederlandse , Portuguese, Danish, Svenska , Finnish,

Norwegian, , Korean, Japanese, More

Audio

You can prioritize the audio language for Blu-ray Disc/ DVD playback. For details on setting items, see “Menu” (p. 25).

Subtitle

You can prioritize the language for Subtitle.

English, Français , , Español , Deutsch , Italiano ,

Nederlandse , Portuguese, Danish, Svenska , Finnish,

Norwegian, , Korean, Japanese, More, Off

(The default settings in [Language] differ depending on your model.)

25 En