■Display Setting
The default settings are marked with “ * ”.
TV
3D Output
You can select 3D or 2D video output from this Player.
Auto* | This Player automatically selects 3D or 2D videos. |
Off | This Player always selects 2D videos. |
Note
–Even if you set “3D Output” to “Auto” and play back a
TV Screen
You can set the screen aspect ratio of the connected TV, and adjust the video output.
If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the connected TV changes, you will have to change the TV Screen setting.
16:9 Full Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below.
16:9 Normal* Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below.
4:3 Pan Scan Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below.
4:3 Letter Box Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below.
| Original |
| On 16:9 (wide screen) TV | ||||||
image size |
|
|
|
|
|
|
| ||
| 16:9 Full |
| 16:9 Normal | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4:3
Original |
|
| On 4:3 TV | ||||
image size |
|
|
|
|
|
| |
4:3 Pan Scan | 4:3 Letter Box | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16:9
SETUP menu
Video Out Select
You can select the video output resolution from Auto, 480i/576i, 480p/576p, 720p, 1080i, and 1080p. When set to Auto, resolution is set to the maximum resolution according to the connected TV.
For more details on output formats, refer to “About the video output formats” (p. 30).
Auto*, 480i/576i, 480p/576p, 720p, 1080i, 1080p
| Note |
|
| |
| – To output HD audio (Dolby TrueHD or |
| ||
4 | ||||
| Master Audio) from HDMI terminal, set Video Out | |||
| Select to Auto or more than 720p. |
| ||
Settings | ||||
Set the same TV System as your TV set. For more details | ||||
TV System |
| |||
You can select TV System from PAL, NTSC and Multi. |
| |||
on output formats, refer to “About the video output |
| |||
| ||||
NTSC, PAL, Multi |
| |||
(The default setting differs depending on your model.) |
| |||
Color Space |
| |||
You can select the Color Space (p. 35) output from |
| |||
HDMI. This function is available when this Player is |
| |||
connected with an HDMI cable. |
| |||
YCbCr 4:4:4* Sets Color Space to YCbCr 4:4:4.
YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2.
Full RGB When RGB is set and white and black on the screen are too faint, select this item. This setting is effective when a connected component supports RGB
RGB | Outputs video signal at normal signal range. | English | |
| |||
|
|
|
|
| Note |
|
|
–This function is only available on TVs that support this function.
HDMI Deep Color
When your TV and/or AV receiver is compatible with Deep Color (p. 35), set this item according to your TV/AV receiver. This function is available when this Player is connected with an HDMI cable.
30 bits, 36 bits, 48 bits, Off*