Pre-Fader or Post-Fader Aux Sends 111
DM2000 Version 2—Owner’s Manual
Pre-Fader or Post-Fader Aux Sends
Aux Sends can be configured individually as either pre-fader or post-fader on the Aux Send
pages (see page 112) or the Aux View pages (see page 115). If Aux Sends are configured as
pre-fader, you can position the send points before or after the [ON] buttons.
Setting Aux Send Levels
Aux Send levels can be set by using the SELECTED CHANNEL AUX/MATRIX SEND
LEVEL controls, the faders, or the Encoders.

Using the SELECTED CHANNEL AUX/MATRIX SEND LEVEL Controls

1Use the LAYER buttons to select the Input Channel Layers, and use the [SEL]
buttons to select Input Channels.
2Use the [BANK] button to select Aux 1–4, Aux 5–8, or Aux 9–12.
3Use the LEVEL controls to set the Aux Send levels.

Using the Faders

1Use the LAYER buttons to select the Input Channel Layers.
2Press the FADER MODE [AUX/MTRX] button to select the Aux/Mtrx
Fader mode.
3Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends
1–12.
4Use the faders to set the Aux Send levels.
Refer to the legend on the left side of the faders when setting Aux Send levels.
Using the Encoders
1Use the LAYER buttons to select the Input Channel Layers.
2Press the ENCODER MODE [AUX/MTRX] button to select the Aux/Mtrx
Encoder mode.
3Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends 1–12.
4Use the Encoders to set the Aux Send levels.
AUX/MATRIXSEND
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX1/MATRIX1
AUX5
AUX9
AUX2/MATRIX2
AUX6
AUX10
AUX3/MATRIX3
AUX7
AUX11
AUX4/MATRIX4
AUX8
AUX12
BANK
DISPLAY
50
40
30
20
15
10
10
5
0
5
70
60
50
40
30
20
15
10
5
0