122 Chapter 11—Matrix Sends
DM2000 Version 2—Owner’s Manual
Using the Encoders
Stereo Out Matrix Sends cannot be set using the Encoders.
1Press the LAYER [MASTER] button to select the Master Layer.
2Press the ENCODER MODE [AUX/MTRX] button to select the Aux/Mtrx
Encoder mode.
3Use the MATRIX SELECT [1–4] buttons to select Matrix Sends 1–4.
4Use Encoders 1–20 to set the Matrix Send levels.
Encoders 21–24 are inactive because Matrix Send Masters do not feature Matrix
Send controls.
Muting Matrix Sends (ON/OFF)
1Press the LAYER [MASTER] button to select the Master Layer.
2Use [SEL] buttons 1–20 to select the Bus Outs and Aux Sends, and use the
STEREO [SEL] button to select the Stereo Out.
The Matrix Sends for the left and right channels of the Stereo Out can be muted individu-
ally. Use the STEREO [SEL] button to select the left and right channels.
3Use the SELECTED CHANNEL AUX/MATRIX SEND [ON] buttons to turn the
Matrix Sends on the selected Output Channel on and off.
Matrix Send Pages
Matrix Send parameters for the Bus Outs, Aux Sends, and the Stereo Out can be viewed and
set on the Matrix Send page.
1Use the MATRIX SELECT [DISPLAY] button to select the Matrix Send page.
2Use the Matrix SELECT [1–4] buttons to select Matrix Sends 1–4.
3Use the cursor buttons to select the Output Channel Matrix Send controls.
If the Master Layer is selected, [SEL] buttons 1–20 can also be used to select Output Channels.
AUX/MATRIXSEND
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX1/MATRIX1
AUX5
AUX9
AUX2/MATRIX2
AUX6
AUX10
AUX3/MATRIX3
AUX7
AUX11
AUX4/MATRIX4
AUX8
AUX12
BANK
DISPLAY