Muting Channels 241
DM2000 Version 2—Owner’s Manual
Muting Channels
Channels can be muted as follows.
1Use the [ON] buttons to mute channels.
The [ON] button indicators of muted channels go out.
2Press the [ON] buttons again to unmute channels.
The [ON] button indicators of unmuted channels are lit.
Grouped channels are muted together. You can temporarily disable a group in order to
mute individual channels by pressing and holding the USER DEFINED KEYS [12]
(CTRL/CLUTCH) button.
The following shortcuts apply.
Panning Channels
Channels can be panned as follows.
1Press the ENCODER MODE [PAN] (PAN) button.
Its indicator lights up.
2Use the Encoders to pan the channels.
Pan positions are displayed by the channel strip displays. See “Pan Display” on page 227 for
more information.
You can view pan settings numerically on the channel strip displays by holding down the
USER DEFINED KEYS [13] (ALT/FINE) button while adjusting the Encoders.
For stereo aux input channels (i.e., channels with two panpots), use the ENCODER MODE
[PAN] (PAN) button to toggle between the left and right panpots, and pan with the
Encoder. When the left panpot is active, the ENCODER MODE [PAN] (PAN) button indi-
cator is lit continuously and the SELECT ASSIGN section of the display shows “Pan.” When
the right panpot is active, the ENCODER MODE [PAN] (PAN) button indicator flashes
and the SELECT ASSIGN section of the display shows “PanR.”
Soloing Channels
Channels can be soloed as follows.
1Use the [SOLO] buttons to solo channels.
The [SOLO] button indicators of soloed channels light up and the [ON] button indicators
of unsoloed channels flash.
2Press the [SOLO] buttons again to unsolo channels.
Grouped channels are soloed together. You can temporarily disable a mix group in order to
solo individual channels by pressing and holding the USER DEFINED KEYS [12]
(CTRL/CLUTCH) button.
To do this... Do this!
Mute all channels USER DEFINED KEYS [5] + [ON]
Mute all selected channels USER DEFINED KEYS [5] + USER DEFINED KEYS [4] + [ON]