112 Chapter 10—Aux Sends
DM2000 Version 2—Owner’s Manual
Muting Aux Sends (ON/OFF)
1Use the LAYER buttons to select the Input Channel Layers, and use the [SEL]
buttons to select the Input Channels.
2Use the SELECTED CHANNEL AUX/MATRIX SEND [BANK] button to select
Aux 1–4, Aux 5–8, or Aux 9–12.
3Use the SELECTED CHANNEL AUX/MATRIX SEND [ON] buttons to turn the
Aux Sends of the selected Input Channel on or off.
Aux Send Pages
You can view and set the Aux Send parameters of all Input Channels on the Aux Send pages.
Operation of the Aux Send pages in Variable and Fixed mode is explained separately.

Variable Mode

See page 110 for information on how to select Variable Aux mode.
1Use the AUX SELECT [DISPLAY] button to select the Aux Send pages.
The Aux Send parameters for the 96 Input Channels are divided among four pages. The
Input Channel 1–24 Aux Send page in Variable mode is shown below. The layout of the
other three pages is the same.
2Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends 1–12.
3Use the cursor buttons to select the Input Channel Aux Send controls.
Input Channels can also be selected by using the Input Channel Layer buttons and [SEL]
buttons.
4To turn Aux Sends on and off, select the rotary controls, and press [ENTER].
The rotary controls of Aux Sends that are turned off, appear gray, and “OFF” appears in
place of the level value. Aux Send levels can still be changed even when Aux Sends are off.
5To set Aux Send levels, select the rotary controls, and use the Parameter
wheel or INC/DEC buttons.
To set Aux Send levels for all Input Channels to nominal, select the ALL NOMINAL button.
AUX/MATRIXSEND
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX1/MATRIX1
AUX5
AUX9
AUX2/MATRIX2
AUX6
AUX10
AUX3/MATRIX3
AUX7
AUX11
AUX4/MATRIX4
AUX8
AUX12
BANK
DISPLAY