Yamaha DM2000 COMP 5.1, COMPAND 5.1

330 Appendix A: Parameter Lists

DM2000—Owner’s Manual

COMP 5.1

Six input, six output compressor for 5.1 surround, with individual solo for each band, and gain

reduction metering of left and right (L+R), left surround and right surround (LS+RS), center (C),

or LFE channels.

COMPAND 5.1

Six input, six output compander for 5.1 surround, with individual solo for each band, and gain

reduction metering of left and right (L+R), left surround and right surround (LS+RS), center (C),

or LFE channels.

Other preset effects (COMP276, COMP276S, COMP260, COMP260S, EQUALIZER601, OPEN-

DECK, REV-X HALL, REV-X HALL, REV-X ROOM, REV-X PLATE) are optional Add-On

Effects. For more information on these effects, refer to the Owner’s Manual that comes with the

Add-On Effects package.

Parameter Range Description

LOW GAIN –96.0 to +12.0 dB Low band level

MID GAIN –96.0 to +12.0 dB Mid band level

HI. GAIN –96.0 to +12.0 dB High band level

PRESENCE –10 to +10

For positive values, the threshold of the high band is lowered and the

threshold of the low band is increased. For negative values, the oppo-

site will occur. When set to 0, all three bands are affected the same.

THRE –24.0 dB to 0.0 dB Compressor threshold

RATIO 1:1 to ∞:1 Compressor ratio

ATTACK 0–120 ms Attack

RELEASE 1

1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s (fs=96 kHz)

Expander release time

KNEE 0–5 Compressor knee

LOOKUP 0.0–100.0 ms Lookup delay

KEY LINK 2

2. 5.1: key-in of all inputs are linked. 5.0: key-in of the L, C, R, LS, and RS are linked (LFE is independent). 3+2: key-in

of L, C, and R are linked, and LS and RS are linked. 2+2: key-in of L and R are linked, and LS and RS are linked.

Key-in linking

L–M XOVR 21.2 Hz–8.00 kHz Low/mid crossover frequency

M–H XOVR 21.2 Hz–8.00 kHz Mid/high crossover frequency

SLOPE –6 dB, –12 dB Filter slope

CEILING –6.0 dB to 0.0 dB, OFF Speciﬁes the maximum output level