Yamaha DM2000 DELAY->ER., DELAY+REV

Effects Parameters 323

DM2000—Owner’s Manual

DELAY->ER.

One input, two output delay and early reﬂections effects in series.

DELAY+REV

One input, two output delay and reverb effects in parallel.

Parameter Range Description

DELAY L 0.0–1000.0 ms Left channel delay time

DELAY R 0.0–1000.0 ms Right channel delay time

FB. DLY 0.0–1000.0 ms Feedback delay time

FB. GAIN –99 to +99% Feedback gain (plus values for normal-phase feedback, minus val-

ues for reverse-phase feedback)

HI. RATIO 0.1–1.0 High-frequency feedback ratio

HPF THRU, 21.2 Hz–8.00 kHz High-pass ﬁlter cutoff frequency

LPF 50.0 Hz–16.0 kHz, THRU Low-pass ﬁlter cutoff frequency

DLY.BAL 0–100% Delay and early reﬂected delay balance (0% = all early reﬂected

delay, 100% = all delay)

TYPE S-Hall, L-Hall, Random,

Revers, Plate, Spring Type of early reﬂection simulation

ROOMSIZE 0.1–20.0 Reﬂection spacing

LIVENESS 0–10 Early reﬂections decay characteristics (0 = dead, 10 = live)

INI. DLY 0.0–500.0 ms Initial delay before reverb begins

DIFF. 0–10 Spread

DENSITY 0–100% Reverb density

ER NUM. 1–19 Number of early reﬂections

SYNC OFF/ON Tempo parameter sync on/off

NOTE L 1

1. (Maximum value depends on the tempo setting)

Used in conjunction with TEMPO to determine left channel DELAY L

NOTE R 1Used in conjunction with TEMPO to determine right channel DELAY

NOTE FB 1Used in conjunction with TEMPO to determine FB. DLY