114 Chapter 10—Aux Sends
DM2000 Version 2—Owner’s Manual
Viewing Aux Send Settings
You can view and set settings of all Aux Sends on the Aux View pages. Level and Pre/Post
parameters are displayed separately. If the Auto AUX/MATRIX Display preference is on, and
an Input Channel is currently selected, these pages appear automatically when a
SELECTED CHANNEL AUX/MATRIX SEND control is operated. See “Auto
AUX/MATRIX Display” on page 275 for more information.

Level Parameters

In Level mode, the Aux View pages display Aux Send Level and On/Off parameters. Fixed
mode Aux Sends can be turned on and off only.
1Use the AUX SELECT [DISPLAY] button to select the Aux View pages.
2Select the DISPLAY LEVEL button, and press [ENTER].
The Aux View parameters for the 96 Input Channels are divided among four pages. The
Input Channel 1–24 Aux View page is shown below in Level mode. The layout of the other
three pages is the same.
3Use the cursor buttons to select the Input Channel Aux Sends.
Input Channels can also be selected by using the Input Channel Layer buttons and [SEL]
buttons. Aux Sends can also be selected by using the AUX SELECT [AUX 1]–[AUX 12] but-
tons.
4Use the Parameter wheel or INC/DEC buttons to set the Aux Send levels.
5Use the [ENTER] button to turn on and off the selected Aux Send.
The various Aux View page indicators are as follows:
Send level set to –, or Fixed mode Aux Send set to off.
Send level bar.
Send set to off.
Send level set to nominal.
Send off, level set to nominal.
Fixed mode Aux Send set to on.
In Variable Aux mode, the Level and On/Off parameter values for the selected Aux Send are
displayed in the lower-right corner of the page, for example, “LEVEL: –2.0 dB ON/OFF:
ON.”
In Fixed Aux mode, the On/Off parameter values for the selected Aux Send are displayed in
the lower-right corner of the page, for example, “LEVEL: FIXED ON/OFF: ON.