Playback
Displaying the current status of this unit on a video monitor
You can display the operating information of this unit on a video monitor.
1Turn on the video monitor connected to this unit.
2Press MDISPLAY.
The current status screen appears in the OSD.
STATUS
Using your headphones
Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel.
y
You can select the amount of time that the current status is displayed in the OSD by using the
y
When you select a sound field program, SILENT CINEMA mode is automatically activated (see page 38).
Note
The OSD signal is not output at the DVR VIDEO OUT jacks and will not be recorded.
Notes
•When you connect headphones, no signals are output at the speaker terminals.
•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.
Muting the audio output
Press IMUTE to mute the audio output. Press IMUTE again to resume the audio output.
y
•You can also rotate D VOLUME or press LVOLUME +/– to resume the audio output.
•You can adjust the muting level by using the “MUTE TYPE” parameter in “SOUND MENU” (see page 53).
•The MUTE indicator flashes in the front panel display when the audio output is muted and disappears from the front panel display when the audio output is resumed.
