Yamaha DSP-AX463 owner manual 48 En, Auto setup Auto Setup, Manual setup Manual Setup

SET MENU

You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■ Auto setup AUTO SETUP

Use this feature to automatically adjust speaker and system parameters (see page 23).

■ Manual setup MANUAL SETUP

Use this feature to manually adjust speaker and system parameters.

Sound menu 1 SOUND MENU

Parameter	Features	Page
	Selects the size of each speaker, the speakers for low-frequency signal output, and the
A)SPEAKER SET	crossover frequency, and the location of the front speakers connected to the FRONT B	50
	terminals.
B)SP LEVEL	Adjusts the output level of each speaker.	52
C)SP DISTANCE	Adjusts the delay time of each speaker.	52
D)CENTER GEQ	Adjusts the tonal quality of the center speaker.	53
E)LFE LEVEL	Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.	53
F)DYNAMIC RANGE	Adjusts the dynamic range of Dolby Digital or DTS signals.	53
G)AUDIO SET	Adjusts the muting level, audio delay, maximum volume level and initial volume level.	53
H)HDMI SET	Selects whether to play back HDMI audio signals on this unit or on another HDMI	54
	component connected to the HDMI OUT jack.
Input menu 2 INPUT MENU
Parameter	Features	Page
A)INPUT ASSIGNMENT	Assigns the input jacks of this unit according to the component to be used.	55
B)INPUT RENAME	Changes the name of the input source.	55
C)VOLUME TRIM	Adjusts the output volume of each input source.	56
D)DECODER MODE	Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the	56
	rear panel of this unit.
E)MULTI CH SET	Selects the video source played in the background of the sources input from the MULTI CH	56
	INPUT jacks.

48 En